Formax 6402 Series - Manual (Page 5)

3
ENGLISH
1. HEALTH, SAFETY AND ENVIRONMENT
1.1 Precautions and Safety Issues
Thoroughly read this operator manual, before using this machine.
Warnings
• If the feed/fold unit and inserter unit have to be physically separated, the operator
should pay attention to the heavy weight of the unit during separation.
• Before connecting check whether the system is suitable for the local mains voltage.
Refer to the type plate.
Safety Precautions
• Only competent personnel should operate this machine.
If incompetent personnel do operate this machine, the manufacturer does not accept
responsibility for any resulting accidents or injuries.
• Only skilled persons, who are aware of the risks involved, may open the protective
covers.
For safety reasons, the machine will not function when the covers are open.
• Keep long hair, fingers, jewelry, etc. away from rotating and moving parts.
• The power connection must be easily accessible, preferably close to the machine.
• For safety reasons, it is essential that the machine is connected to a socket outlet that
has a protective earth connection.
• Over-current protection in the equipment also relies on the branch circuit protection
(max. 20 A).
• The following part(s) is (are) considered the equipment disconnect device(s):
-
Power supply cord plug
- 12-pole connector, located on the right-hand side