Fluke Biomedical 190M - Manual (Page 90)

190M Series Medical ScopeMeter
Users Manual
80
Using FlukeView ® ScopeMeter
Software
With FlukeView ® ScopeMeter software you can upload
waveform data and screen bitmaps to your PC or
notebook computer for further processing.
USB drivers for the test tool and a FlukeView ® Software
are on the CD-ROM included in the shipment.
Connecting to a Computer
To connect the test tool to a PC or notebook computer and
use the FlukeView ScopeMeter software for Windows
®
(SW90W), do the following:
 Use a USB-A to mini-USB-B interface cable to
connect a computer to the mini USB PORT of the test
tool (See Figure 36).
 Install the test tool USB drivers, see Appendix A.
 Install the FlukeView ® ScopeMeter software. For
information about installing and using FlukeView ®
ScopeMeter software see the FlukeView ®
ScopeMeter Users Manual on the CD ROM.
Figure 36. Connecting to a Computer
Notes
− The test tool input channels are electrically
isolated from the USB port.
− Remote control and data transfer via mini-
USB is not possible while saving or recalling
data to or from a USB memory device.