Fluke Biomedical 190M - Manual (Page 105)

95
Chapter 7
Maintaining the Test Tool
About this Chapter
This chapter covers basic maintenance procedures that
can be performed by the user. For complete service,
disassembly, repair, and calibration information, see the
Service Manual. (
www.flukebiomedical.com )
W Warning
• Have only an approved technician repair
the product.
• Use only specified replacement parts.
• Before carrying out any maintenance,
carefully read the safety information at
the beginning of this manual.
Cleaning the Test Tool
XW Warning
Remove the input signals before you clean
the test tool.
Clean the test tool with a damp cloth and a mild soap. Do
not use abrasives, solvents, or alcohol. These may
damage the text on the test tool.
Storing the Test Tool
If you are storing the test tool for an extended period of
time, charge the Li-ion (Lithium-ion) batteries before
storing.