Fluke Biomedical 190M - Manual (Page 123)

Specifications
Oscilloscope
8
113
Video Trigger
Standards..... PAL, PAL+, NTSC, SECAM, Non-interlaced
Modes ...................... Lines, Line Select, Field 1 or Field 2
Source .............................................................................. A
Polarity .................................................. Positive, Negative
Sensitivity ........................................ 0.7 division sync level
Pulse-Width Trigger
Screen Update ............................. On Trigger, Single Shot
Trigger Conditions ........... T, =T (±10 %),
≠
T(±10 %)
Source .............................................................................. A
Polarity ...................................... Positive or negative pulse
Pulse Time Adjustment Range ........... 0.01 div. to 655 div.
with a minimum of 300 ns (T) or 500 ns (=T,
≠
T),
a maximum of 10 s,
and a resolution of 0.01 div. with a minimum of 50 ns
Continuous Auto Set
Autoranging attenuators and time base, automatic
Connect-and-View™ triggering with automatic source
selection.
Modes
Normal .................................... 15 Hz to max. bandwidth
Low Frequency ..........................1 Hz to max. bandwidth
Minimum Amplitude A, B, C, D
DC to 1 MHz ......................................................... 10 mV
1 MHz to max. bandwidth ..................................... 20 mV
Automatic Capturing Scope Screens
Capacity .............................................. 100 Scope Screens
For viewing screens, see Replay function.