Fluke Biomedical 190M - Manual (Page 158)

190M Series Medical ScopeMeter
Users Manual
C-2
Instrument firmware is loaded using a dedicated Fluke
software program that is available only at Fluke
authorized service centers.
Calibration constants stored in D5000, D5002 can be
read using special remote interface commands (available
only for use by the Fluke factory).
The calibration constants are generated when the test
tool is sent through its calibration process and are
fundamental to the test tool operation.
To clear the saved screens and instrument setups:
1
SAVE
Push the SAVE button.
2
F4
Press F4 – FILE OPTIONS…
If you see a screen like figure C-1, no screens and
instrument setups are stored. Press the F4 key (CLOSE)
to exit.
If you see a screen like figure C-2, continue with step 3.
Figure C-C-1. Screen if memory is empty
Figure C-C-2. Screen if memory is not empty