Fluke Biomedical 190M - Manual (Page 53)

Using The Recorder Functions
Plotting Measurements Over Time (TrendPlot™)
2
43
Figure 20. TrendPlot Reading
Note
When simultaneously TrendPlotting two readings, the
screen area is split into two sections of four divisions each.
When simultaneously TrendPlotting three or four readings,
the screen area is split into three or four sections of two
divisions each.
When the test tool is in automatic mode, automatic vertical
scaling is used to fit the TrendPlot graph on the screen.
5
F1
Set RECORDER to STOP to freeze
the recorder function.
6
F1
Set RECORDER to RUN to restart.
Note
Scope TrendPlot is not possible on cursor related
measurements. As an alternative you may use
FlukeView logging of readings.