Fluke Biomedical 190M - Manual (Page 26)

190M Series Medical ScopeMeter
Users Manual
16
Figure 6. Scope Connections
Adjusting the Probe Type Settings
To obtain correct measurement results the test tool probe
type settings must correspond to the connected probe
types. To select the input A probe setting do the following:
1 A Display the INPUT A key labels.
2 F3 Open the PROBE ON A menu.
3
ENTER
Select the probe type Voltage,
Current, or Temp
4
ENTER
Voltage: select the voltage probe
attenuation factor
Current and Temp: select the
current probe or temperature
probe sensitivity