Fluke Biomedical 190M - Manual (Page 87)

Using Memory and PC
Saving and Recalling
5
77
To recall a screen as a reference waveform to compare it
to an actually measured waveform, see Chapter 1
‘Comparing Waveforms’.
Recalling a Setup Configuration
To recall a setup configuration, do the following:
1
SAVE
Display the SAVE key labels.
2
F2
Open the RECALL menu.
3
F1
Select the source, internal memory
(INT) or a USB device.
4 Highlight SETUP .
5
ENTER
Accept your choice and jump to the
filename field.
6 Select the file to be recalled,
7
ENTER
Recall the selected setup.
From this point you continue in the new operating
configuration.
Viewing Stored Screens
To scroll through the memories while looking at the stored
screens, do the following:
1
SAVE
Display the SAVE key labels.
2
F2
Open the RECALL menu.
3
F1
Select the source, internal memory
(INT) or a USB device.
4
ENTER
Jump to the filename field.
5 Highlight a file.
6
F2
View the screen, and open the
viewer.
7 Scroll through all stored screens.
8
F3
Print screen, saves the screen to
USB device (if connected) or
internal memory.
9
F4
Exit the View mode.