Fluke Biomedical 190M - Manual (Page 54)

190M Series Medical ScopeMeter
Users Manual
44
Displaying Recorded Data
When in normal view ( NORMAL ), only the twelve most
recently recorded divisions are displayed on screen. All
previous recordings are stored in memory.
VIEW ALL shows all data in memory:
7
F3
Display an overview of the full
waveform.
Press
F3
repeatedly to toggle between normal
view ( NORMAL ) and overview ( VIEW ALL ).
When the recorder memory is full, an automatic
compression algorithm is used to compress all samples
into half of the memory without loss of transients. The
other half of the recorder memory is free again to continue
recording.
Changing the Recorder Options
At the lower right of the display, the status line indicates a
time. You can choose this time to represent either the start
time of the recording (‘Time of Day’) or the time elapsed
since the start of the recording (‘From Start’).
To change the time reference, proceed from step 6 as
follows:
7
F2
Open the RECORDER OPTIONS
menu.
8
ENTER
Select Time of Day or From
Start
Turning Off the TrendPlot Display
9 F4 Exit the recorder function.