Flowserve StarPac II Control Valves - Manual (Page 7)

Operation
Getting Started
This manual is designed to help you become familiar with, and
efficiently operate, the StarPac
®
II Intelligent Control System.
While the information presented in this manual is believed to be
accurate, it is supplied for informative purposes only and should not
be considered to be certified or as a guarantee of satisfactory results
by reliance thereon. Specific instructions for the installation, wiring,
operation and maintenance of the StarPac II are contained in the
StarPac II manual (IOM 42). For information on Personal Computer
software, see the StarTalk for Windows™ Manual.
Because Flowserve is continually improving and upgrading its
product design, the specifications and information included herein
are subject to change without notice.
Flowserve will continue to provide its customers with the best
possible products and service available. Should you have any
questions about these provisions or about Flowserve products,
contact your local Flowserve representative or the Advanced Product
Development Group directly (801 489 2560). You can also access
Flowserve information via the internet HTTP: //www.flowserve.com.
Restrictions
Copyright © 1996, Flowserve Corporation. All rights reserved. No part
of this manual may be reproduced in any form without the written
permission of the publisher. Due to product changes and periodic
review, the information contained in this manual is subject to change
without notice. All correspondence should be addressed to: Flowserve
Divisional Communication Group, Box 2200, Springville, Utah 84663-
0903.
This manual is not intended to be a replacement for the many manuals
already available for teaching and understanding instrumentation and
process control (such as the Instrument Society of America’s Instrument
Engineers Handbook, Revised Edition, 1982, etc.). A copy of one of these
manuals may prove valuable to the user in determining what StarPac II
parameters need to be set with respect to a particular application or
process.
StarPac II User Interface Manual 1