Flowserve StarPac II Control Valves - Manual (Page 27)

Process Pressure - This option sets the process pressure
engineering units for the StarPac II system. Use the NEXT and
PREVIOUS function keys to select units from the following list:
PSIG - Pounds per square-inch gauge
PSIA - Pounds per square-inch absolute
kPa G - Kilopascals gauge
kPa A - Kilopascals absolute
kgscmG - Kilograms per square-centimeter gauge
kgscmA - Kilograms per square-centimeter absolute
Bar G - Bar gauge
Bar A - Bar absolute
Liquid Flow - Sets the liquid flow engineering units for the
StarPac II system. Use the NEXT and PREVIOUS function keys
to select units from the following list:
Usgpm - US gallons per minute
l/m - Liters per minute
lbs/hr - Pounds per hour
kg/hr - Kilograms per hour
cm3/hr - Cubic centimeters per hour
bbl/dy - Barrels per day (42 gal/bbl)
Ukgpm - Imperial gallons per minute
CUSTOM - Allows you to create your own custom units by
first entering a multiplier that will operate on the StarPac
native liquid flow units which are Gallons/Minute to create
your new units. Next, select the time base that relates to
your flow rate of seconds, minutes, hours, or days for the
totalizer to use. Then enter the name for the units you want
to display. The name is limited to six characters. Lastly,
enter the name that you want the totalizer to display for the
totalized units.
Gas Flow - Sets the gaseous flow engineering units for the
StarPac II system. Use the NEXT and PREVIOUS function keys
to select units from the following list:
lbs/hr - Pounds per hour
kg/hr - Kilograms per hour
SCFH - Standard cubic feet per hour
MSCFD - Million standard cubic feet per day
SCFM - Standard cubic feet per minute
SCMH - Standard cubic meters per hour
CUSTOM - Allows you to create your own custom units by
first entering a multiplier that will operate on the StarPac
native gas flow units which are Pounds/Hour to create your
new units. Next you select the time base that relates to your
flow rate of seconds, minutes, hours, or days for the totalizer
to use. Next enter the name for the units you want to
display. The name is limited to six characters. Last enter
StarPac II User Interface Manual 21