ETA Crustum - Manual (Page 52)

52
GB
/ 97
Problem Cause Solution
The ingredients are not mixed
correctly and the bread is not
baked correctly.
Improper program setting.
During operation of the baker,
the lid was opened several
times.
Long-term power failure
during bread baker operation.
Rotating of the kneading
blade is blocked.
Check the program selected and
other settings.
Do not open the lid after the last
rising.
See Chapter IV. Functions of the
bread baker.
Check whether the kneading
blade is blocked by grains etc.
Remove the baking pan and
check whether the shaft rotates
freely. If not, please contact the
customer service.
The baking pan lifts up during
kneading.
Too thick dough.
The kneading blade is
blocked and the baking pan is
lifted up.
Open the lid and add some
liquids. Then, close the lid again.
The bread baker can not be
turned on. Display shows
HHH.
The bread baker is still hot
from previous baking cycle.
Press the START/STOP button to
cancel audio signal. Remove the
baking pan and let the baker cool
down. Then, return the baking pan
back to its place, set the program
again and turn the baker on.
IX. ENVIRONMENT
If the size of the appliance allows, all the parts contain marking of the materials used
for production packaging, components and accessories as well as for recycling. The
symbols on the product or in the accompanying documentation mean that the electrical
or electronic product used must not be liquidated together with communal waste. To
ensure the appropriate liquidation take the used appliance to a collection point where it
will be accepted free of charge. Correct liquidation of the product helps to protect valuable
natural resources and helps to prevent a potential negative impact on the environment and
human health which can be the outcome of inappropriate liquidation of waste. More details
can be obtained from your local authorities or the closest collection point. Inappropriate
manipulation of such waste can result in a fine according to the national legislation.
Maintenance of a serious nature or maintenance which requires interference with
the internal parts of the appliance must be carried out by a professional service
centre! By failing to follow the instructions issued by the manufacturer, the right to
the warranty service will be invalidated!