Echo Bear Cat 77353-00 - Manual (Page 7)

3 Inch Trailer Instruction Sheet
1
2
3
3
3
4
5
3
6
7
8
Before placing machine onto trailer, secure the trailer
in a manner that it will not move while mounting.
WARNING
FRONT DISCHARGE - MACHINES WITH
SERIAL # 707807 & BELOW; # 707865 TO
C03262
Figure 8
1. Using a 11/32" to 3/8" size drill bit, drill holes in housing
at locations and measurements detailed in Figures 6
& 7.
2. Once holes are drilled, attach the 11.5" engine mount
bracket (1) to outside hole of front left trailer panel
flange (2) using two 5/16 x 7/8" bolts (3), washers and
nuts.
3. Mount the 13.13" bracket (4) to machine housing (5) at
newly drilled hole location using two 5/16 x 7/8" bolts,
washer and nuts.
4. Set machine onto trailer aligning holes in brackets and
secure bracket to bracket using two 5/16 x 7/8" bolts,
washers and nuts.
5. Install corner bracket (6) to threaded stud (7) with 5/16
washer and nut, and also to trailer frame (8) at rear
right location.
*When securing slotted holes use a washer on the bolt side.
1-3/8"
1"
11/32 TO 3/8
HOLE DIAMETER
Figure 6
DRILL
HOLES
Figure 7
MOUNTING MACHINE ON TRAILER: