Echo Bear Cat 77514-00 - Manual

Instruction Sheet
Instructions
PN 77511-00
Rev. 031315
SUBJECT: 4-WAY WEDGE KIT, PN
77514-00
FITS MODELS: LS21, LS22 & LS27
SN: C01077 - F01052
Before inspecting or servicing any part of this machine,
shut off or disconnect power source and make sure all
moving parts have come to a complete stop.
WARNING
1
2
3
KIT, 4 WAY WEDGE, 77514-00
ITEM PART # DESCRIPTION QTY.
1 15256 SCREW, 3/8 X 3/4 SQ HD SET ZP 2
2 77345-00
ASSEMBLY, 4-WAY WEDGE, SER-
VICE PART (INCLUDES ITEM 3)
1
3 36472-00 DECAL, WEDGE CAUTION 1
4-WAY WEDGE INSTALLATION
1. Push the 4-way wedge over the existing wedge.
2. Pull out on the black knob of the pin and slide 4-way
wedge down as far as possible so pin locks into place
when released.
3. Secure into place with two 3/8 x 3/4" square head
screws.
OPERATION
The 4-way wedge will split logs into four pieces. Be aware
of where all four split logs fall. The top two pieces may be
ejected upward slightly before falling.