Echo Bear Cat 73607-00 - Manual

Manual P/N 73644-00 (Revised)
Rev. 020215
SUBJECT: WHEELED VACUUM
CASTER WHEEL KITS (PN #’s
73607-00 & 76967-00)
MODELS: ALL WHEELED
VACUUMS
Instructions
Installing caster wheel kit 73607-00 for
models with SN A01322 and below:
1. Remove the existing front wheels by
removing the cotter pin or push nut
holding on the front wheels.
2. Remove the old wheels and the wheel
components.
3. Slide the castor wheel assemblies onto
each axle.
4. Secure the wheels (on serial number
A01322 and below) with the provided
cotter pin clips included with the caster
wheels.
To prevent personal injury or property damage: Shut
off engine, disconnect spark plug wire, and make sure
that all moving parts have come to a complete stop
before servicing, adjusting, or repairing.
WARNING
1
3
5
3
6
4
2
P/N 73607-00 - WHEELED VACUUM CASTOR WHEEL KIT,
FOR SERIAL NUMBERS A01322 AND BELOW ONLY
ITEM PART NO. DESCRIPTION QTY
1 13872-00 WHEEL, 4 X 2 CASTER 2
2 15006 BOLT 3/8 X 1 GR5 HEX CAPSCREW ZP 8
3 15031 WASHER, 3/8” FLAT ZP 16
4 15368 HAIRPIN CLIP ZP # 203 2
5 15388 NUT, 3/8” NYL INSERT, NE, ZP 8
6 73671-35 WELDMENT, CASTER WHEEL MOUNT 2