Echo Bear Cat 77353-00 - Manual (Page 6)

3 Inch Trailer Instruction Sheet
1
2
3
3
4
5
6
7
Before placing machine onto trailer, secure the trailer
in a manner that it will not move while mounting.
WARNING
1. Using a 11/32" to 3/8" size drill bit, drill holes in housing
at locations and measurements detailed in Figures 6
& 7.
2. Attach the 13.13" engine mount bracket (1) aligned to
holes on front right plate (4) of the trailer securing with
5/16 x 7/8" bolts (3), washers and nuts.
3. Lower machine onto trailer with 13.13" engine mount
bracket holes aligned to new drill holes on housing
(2). Secure using two 5/16 x 7/8" bolts (3), washers
and nuts.
REAR DISCHARGE - MACHINES WITH
SERIAL # 707807 & BELOW; # 707865 TO
C03262
Figure 5
4. Install corner bracket (5) on threaded stud (6) at front
panel location using 5/16" nut and washer. Also secure
at inside hole of left trailer plate flange (7)
*When securing slotted holes use a washer on the bolt side.
1-3/8"
1"
11/32 TO 3/8
HOLE DIAMETER
Figure 6
DRILL
HOLES
Figure 7
MOUNTING MACHINE ON TRAILER: