Echo Bear Cat 77000-00 - Manual

Instruction Sheet
Instructions
PN 77001-00
Rev. 080112
SUBJECT: Two-Wheel Tow Kit,
PN 77000-00
MODELS: All 3" Chipper/Shredders,
except 70580 and SC3270T models
Before inspecting or servicing any part of this machine,
shut off engine, disconnect the spark plug and make sure
all moving parts have come to a complete stop.
WARNING
The tow kit adds two wheels and a tow bar to the standard
3-inch chipper/shredder so that it can be towed by a garden
tractor or ATV.
1
2
3
4
5
INSTALLATION fOR SERIAL NUMBERS
C03478 AND ABOVE (fIGURE 1)
1. fOR 3-INCh ChIppER/ShREDDERS C03478 AND
ABOVE , remove the metal leg (1) by first removing the
two 5/16 x 1-3/4" bolts (2), washers and nuts closest
to the chipper chute on the leg support.
Figure 1. Leg removal, Chipper/Shredder C03478 and above
2. Remove two 5/16" flange nuts (3) and remove support
leg. Reattch axle (4) and wheels using the removed
flange nuts
3. Remove three 5/16" flange nuts (5).
Before cutting off the welded or removing bolt-on support
leg, make sure machine is supported and secured to
prevent the machine from falling or tipping that could
result in injury
NOTE