Echo Bear Cat 77353-00 - Manual (Page 4)

3 Inch Trailer Instruction Sheet
Before placing machine onto trailer, secure the trailer
in a manner that it will not move while mounting.
WARNING
1
2
3
4
4
5
6
7
4
FRONT DISCHARGE CONFIGURATION-
MACHINES SERIAL # C03478 TO CURRENT
1. A hoist or other lifting device will
need to be used to lift the machine
into place on trailer.
2. The following are the approximate
weights of the chipper/shredders:
SC3265 - 285 lbs. (129.3 kg)
SC3305 - 255 lbs. (116 kg)
SC3305E (w/o battery) - 255
lbs (116 kg)
SC3342 - 255 lbs. (116 kg)
Ensure that the lifting device used is
rated and certified to lift more than
the weight of the machine.
3. Place the engine mount bracket
(1) at outside hole of front left
mounting flange (2) and outside
hole of rear mounting flange (3).
Make sure tabs of engine mount
bracket are to the outside of the
flanges. Secure using two 5/16 x
7/8" bolts (4), washers and nylock
nuts.
4. Orientate the machine so the
discharge door is facing toward the
front of trailer.
5. Align holes on base of housing (5)
to center slotted hole on front right
plate (6) of trailer. Also align holes
in engine mount base (7) to engine
mount bracket (1).
6. Once all holes are aligned properly,
secure with four 5/16 x 7/8" bolts
(4), washers and nylock nuts.
Figure 4
MOUNTING MACHINE ON TRAILER: