Echo Bear Cat 77353-00 - Manual (Page 3)

3 Inch Trailer Instruction Sheet
Before placing machine onto trailer, secure the trailer
in a manner that it will not move while mounting.
WARNING
1. Orientate the machine so the
discharge door is facing toward the
rear of trailer.
2. Align hole on engine mount base (1)
of machine to hole on front right plate
(2) of trailer. Also align hole on base
of housing (3) to inside hole of front
left mounting flange (4).
3. Secure machine to trailer using four
5/16 x 7/8" hex bolts (5) washers and
nylock nuts.
1
2
3
4
5
5
REAR DISCHARGE CONFIGURATION-
MACHINES SERIAL # C03478 TO CURRENT
Before mounting machine to trailer, shut off power
source and remove key on engine, disconnect the
battery cables (if applicable) and make sure all moving
parts have come to a complete stop and the machine
has completely cooled down.
WARNING
Figure 3
MOUNTING MACHINE ON TRAILER: