DNF Controls DMAT-EZ - Manual (Page 23)

DMAT-EZ, Instant Replay Controller Page 23 of 26
Function Key Press Description
LOOP [LOOP ENABLE] Plays the currently loaded clip or Playlist in a
continuous loop.
NEXT CUE [NEXT CUE] Step to the next CUE Location.
PLAY [PLAY] If an OUT point is marked, play to the OUT
point and stop. If no OUT point is marked,
play normally. If the CLIP ID ends with an ‘*’
or ‘#’, do loop play.
PLAYLIST
NEXT NUMBER
[SHIFT] + {NEXT} Select next playlist number
PLAYLIST
PREVIOUS
NUMBER
[SHIFT] + {PRV} Select previous playlist number
RECORD [SHIFT] + [RECORD]. Creates Master Clip and places VTR into the
Record mode
RECUE [RECUE] If the IN point is marked, cue to the IN point.
REVERSE SLO-MO [REV] While in SLO-MO mode press and hold the
[REV] key to play in reverse direction.
REWIND [RWD] Press and HOLD to shuttle backward. Release
key to stop. Set WIND Speed in MENU.
SHUTTLE [SHUTTLE] Select SHUTTLE mode and enable Wheel.
SLOMO [SLOMO] Press [SLOMO] to slomo the VTR. Turn the
Wheel. (Or move the T-Bar, if available) to
change the play speed. Press [SLOMO] to
STILL frame. OR press any transport key to
exit SLOMO.
SLO-MO SPEED
PRESET
[SHIFT] + [SLOMO] For WHEEL ONLY: Press [SHIFT] + [SLOMO]
to preset the slomo speed. Turn the Wheel to
select desired speed. Press [ESC] or any
transport key to exit.
STOP [STOP] Press once to STILL frame VTR. Press again to
put VTR into STOP mode.