DNF Controls DMAT-EZ - Manual (Page 19)

DMAT-EZ, Instant Replay Controller Page 19 of 26
The Speed is not saved as part of the element.
There is no Ganged playout of playlists.
VI. REFERENCE
A. Setup Menu
Press [MENU]. The MENU indicator will turn on.
The display will show the following parameters with their current settings.
Turn the wheel to select a menu option.
Press the {CHANGE} softkey to modify the current setting.
Press the {EXIT} softkey to exit the Setup Menu. The current setting will
be in affect.
PARAMETER DESCRIPTION
WORK FOLDER
(Available in
AMP protocol
only)
“default” is the default name. Use the Wheel to select a different
folder/bin and press the [GOTO] key.
OR
Press [ENTER] to use the Keypad or an attached PC type keyboard to
enter up to a 32 character name (this will not create a folder, this is only
a shortcut for selecting the folder name). Press the [ENTER] key to
complete the function.
REC CLIPNAME “DNFREC” is the default name. To change the default name use the
Keypad or an attached PC type keyboard to enter up to 6 characters (the
suffix of channel number and id will still be added to the name). Press
the [ENTER] key to complete the function.
STANDARD Press Softkey to select the Timecode standard for time calculations:
{NTSC}, {DF}, {PAL}
WIND MODE Press Softkey to select:
{HOLD} (Fast wind is maintained only while key is depressed.)
OR
{LATCH} (Fast wind is maintained after key is released.)
Set the fast wind speed (x3.9 to x23.7) by pressing the {SPEED}
softkey.