DNF Controls DMAT-EZ - Manual (Page 13)

DMAT-EZ, Instant Replay Controller Page 13 of 26
2. Save CUEs
Settings in the SETUP MENU will affect how the CUEs are saved.
The AUTO SAVE feature will add duration to the marked IN or OUT
point. The duration is settable in the SETUP MENU (the default
value is 10 seconds).
The CUE ADVANCE feature will increment the CUE number each time
the [IN] or [OUT] key is pressed. The [OUT] key will not advance
the CUE number when the AUTO SAVE is turned OFF.
Settings Available in the Setup Menu:
a) AUTO SAVE = OFF and CUE = CURRENT:
Select the CUE before marking the IN or OUT point by pressing
the [NEXT] or [LAST] key.
Press the [IN] or [OUT] key to mark the point. The marked
IN and OUT points are entered into the current CUE. With
subsequent presses of the [IN] or [OUT] keys the point will be
modified, and the original point will be lost. The CUE number
remains the same.
b) AUTO SAVE = ON and CUE = CURRENT:
Select the CUE before marking the IN or OUT point by pressing
the [NEXT] or [LAST] key.
Press the [IN] or [OUT] key to mark the point. The marked
IN point is entered into the current CUE with duration equal to
the time preset in the SETUP MENU. With subsequent presses
of the [IN] key the points will be modified and the original
points will be lost. The CUE number remains the same. If an
OUT point is entered the in point will be calculated to create a
duration equal to the time preset in the SETUP MENU. With
subsequent presses of the [OUT] key the points will be
modified and the original points will be lost. The CUE number
remains the same.
c) AUTO SAVE = OFF and CUE = ADVANCE:
Press
the [IN] key to mark the point. The marked IN point is
entered into the next CUE. With every press of the [IN] key
the IN point is entered into the next CUE. Entering an OUT
point is optional but must be done after pressing the [IN] key.
d) AUTO SAVE = ON and CUE = ADVANCE:
Press
the [IN] or [OUT] key to mark the point. The marked
IN point is entered into the next CUE with a duration equal to
the time preset in the SETUP MENU. With every press of the
[IN] key, the IN point with duration is entered into the next
CUE. IF the [OUT] key is pressed the out point is entered into
the next CUE with duration equal to the time preset in the
SETUP MENU. With every press of the [OUT] key, the OUT
point with duration is entered into the next CUE.
The IN or OUT points can be modified later.