DNF Controls DMAT-EZ - Manual (Page 12)

Page 12 of 26 DMAT-EZ, Instant Replay Controller
D. CUEs
The working (loaded) CUE is displayed in the upper portion of the screen.
The saved CUEs are displayed in the lower portion of the screen.
There are 500 CUEs for each channel. The numbering starts with 1000 for
channel 1, 2000 for channel 2, 3000 for channel 3, and 4000 for channel
4. If channels are grouped together, all CUE numbers are available in that
group. There is no protection from marking a “wrong” CUE, i.e. if the user
on channel 1 selects CUE 2000 and presses the [IN] key, the CUE will be
saved and no warning will be displayed.
1. Mark CUEs
NOTE: Press [REC] key to put channel into EE before marking live
shots. If gang is set, all ganged VTRs will have their points marked.
On the 44 model:
Press a VTR channel [1], [2], [3], or [4].
On the 22 model:
Press a VTR channel [1] or [2].
Press the [NEXT] or [LAST] key, or enter the CUE number on the
numeric key pad to select the CUE into which you want to mark the
IN or OUT points.
Pressing the [IN] or [OUT] key will record the time indicated on
the display into the IN or OUT points accordingly. The LED above
each key will light to indicate that the point has been entered.
If an IN point is entered, and the time is after the OUT point the
OUT point is cleared.
Press the [DEL] + [IN] or [DEL] + [OUT] to clear the IN or OUT
points.
Press the [SHIFT] + [IN] or [SHIFT] + [OUT] keys.
To cue to the selected point press the {GOTO} softkey.
OR
To modify the IN or OUT points, use the numeric keypad
followed by pressing [ENTER].
The Cue point can be given a text label to help in identifying the
cue. Press the [LABEL] key then enter up to eight characters using
the key pad or a PC type key board attached to the keyboard
connector on the rear of the DMAT. Press [ENTER] on either the
keypad or PC keyboard to complete the label function.