DNF Controls DMAT-EZ - Manual (Page 21)

DMAT-EZ, Instant Replay Controller Page 21 of 26
PARAMETER DESCRIPTION
CUE POINT Select the appropriate softkey to enable or disable the ADVANCE function.
{ADVANCE} The CUE number will increment each time the [IN] or
[OUT] key is pressed. If the AUTO SAVE function is not on, the [OUT]
key will not advance the CUE number (this will allow IN and OUT points to
be marked).
{CURRENT} The CUE number will remain the same after the [IN] or
[OUT] key is pressed.
AUTO-SAVE Select the appropriate softkey to enable or disable the AUTO-SAVE
function
{ON} Pressing the [IN] key will enter the IN point and the OUT point
will automatically be marked with the In Time + DEFAULT DURATION.
Pressing the [OUT] key will enter the OUT point and the IN point will
automatically be marked with the out time – (minus) the DEFAULT
DURATION.
{OFF} No duration will be set.
DEFAULT DUR Use Key Pad to enter the Auto-save duration.
VIDEO DELAY Use Key Pad to enter the Play Delay inherent to the video server.
GROUP Select the appropriate softkey
Model 44:
{NONE} No channel grouping.
{TWO} Group channels 1-2 and 3-4.
{ALL} Group all channels 1-2-3-4.
Model 22:
{NONE} No channel grouping.
{ALL} Group channels 1-2.
{SERVICE}
SOFTKEY
Select the appropriate softkey
{DEFAULTS} Set DMAT to factory defaults
{CLEANUP} Deletes all CUEs on all channels.
Press [ENTER] to continue or press [ESC] to exit without changing
settings.