DNF Controls DMAT-EZ - Manual (Page 17)

DMAT-EZ, Instant Replay Controller Page 17 of 26
F. Playlist
The 6 keys directly below the display are the softkeys
({SOFTKEYS}).These are used to manipulate the playlist.
Press the {LIST} softkey to enable Playlist mode and cue the list to the
top.
Key Standalone function [Shift] + {key function}
{LIST} Cue to the top of the list ( the
highlight also moves to the first
element)
None
{ADD} Append an element to the end of
list
None
{INS} Insert element before the
highlighted element None
{PREV} Move the highlight to the
previous element.
Change current playlist number
to the previous number. Do not
cue the playlist
{NEXT} Move the highlight to the next
element.
Change current playlist number
to the next number. Do not cue
the playlist.
{DEL} Delete the highlighted element Clear the selected list (Are you
sure? prompt is displayed first)
Each playlist can contain 20 elements. Each channel may have up to 10
playlists. The numbering of the playlists is similar to the numbering of the
CUEs. Channel 1 has playlists numbered from 10 to 19, channel 2: 20 –
29, channel 3: 30- 39, and channel 4: 40 – 49.
If channels 1 and 2 are grouped, any playlist from 10 to 29 may be loaded
on that channel. If channels 1 and 2 are grouped, any CUE between 1000
and 2999 may be added to any playlist.
The playlist is displayed as two columns of 10 elements each as in the
following example:
1. >1013<> 11. 1156
2. 1032 12. 1257
… …
10. 1009 20. 1003
The arrows next to the clip number indicate that the element is cued.
When the {NEXT} key is pressed, the highlight moves down the column.
When {PREV} key is pressed, the highlight moves up the column.