DNF Controls DMAT-EZ - Manual (Page 14)

Page 14 of 26 DMAT-EZ, Instant Replay Controller
3. Recall CUEs
CUEs are displayed in the lower portion of the screen.
Press the [NEXT] or [LAST] key or enter the CUE number on the
numeric keypad to select the CUE that you want to recall.
Then press the [GOTO] key. The CUE will be loaded on the server
and cued to the IN point.
4. Edit CUEs
Press a VTR channel:
On the 44 model:
Press a VTR channel [1], [2], [3], or [4].
On the 22 model:
Press a VTR channel [1] or [2].
Press the [NEXT] or [LAST] key, or enter the CUE number on the
numeric key pad to select the CUE that you want to edit.
Press the [IN] or [OUT] key to mark the time indicated on the
display into the IN or OUT points accordingly.
If an IN point is entered, and the time is after the OUT point the
OUT point is cleared.
Press the [DEL] + [IN] or [DEL] + [OUT] to clear the IN or OUT
points.
To modify the IN or OUT points, press the [SHIFT] + [IN] or
[SHIFT] + [OUT] keys. Then use the numeric keypad followed by
pressing [ENTER].
The Cue point can be given a text label to help in identifying the
cue. Press the [LABEL] key then enter up to eight characters using
the key pad or a PC type key board attached to the keyboard
connector on the rear of the DMAT. Press [ENTER] on either the
keypad or PC keyboard to complete the label function.