DNF Controls DMAT-EZ - Manual (Page 22)

Page 22 of 26 DMAT-EZ, Instant Replay Controller
VII. FUNCTION TABLE
Function Key Press Description
CLIPLIST [CLIPLIST] Press the [CLIPLIST] key to select a clip to
be loaded into the selected play channel. This
clip can be the record clip or any other clip on
the server.
EE [REC] Press [REC] to cue the play channel to the
record time minus the record delay and place
the play channel in E-E mode.
FAST FORWARD [FFWD] Press and HOLD to shuttle forward. Release
key to stop. Set WIND Speed in MENU.
GANG SETUP {GANG} Model 44:
Individually press the VTR keys to be
included in the gang. The LED above the
key will turn on. Press the VTR key again to
remove from gang. The LED above the key
will turn off. Press [GANG] to exit. Upon
exiting, all members of the gang will have
their VTR LEDs turned on. The flashing LED
shows which VTR is currently selected.
Model 22:
Press the [GANG] key to gang both
channels.
All members of the gang will have their VTR
LEDs turned on. The flashing LED shows
which VTR is currently selected.
Press the [GANG] key again to cancel the
gang mode.
GOTO [GOTO] Press the [GOTO] button to load the selected
CUE on the selected VTR channel. The clip will
be cued to the in point.
GOTO ENTERED
TIME [SHIFT] + [RECUE] Search the VTR to the manually entered time.
Use the ST400 numeric keypad. Press
[ENTER] or [RECUE].
GOTO LIVE [GOTO LIVE] Press [GOTO LIVE] to cue the play channel to
the record time minus the record delay.
JOG [JOG] Select JOG mode and enable Wheel.
LABEL CUE [LABEL] Press the [LABEL] key to label the CUE using
the attached PC Keyboard. 8 characters max.
LAST CUE [LAST CUE] Step to the previous CUE Location.