DNF Controls DMAT-EZ - Manual (Page 20)

Page 20 of 26 DMAT-EZ, Instant Replay Controller
PARAMETER DESCRIPTION
SLOMO Press the {TBAR} (or {WHEEL}) softkey to select the T-bar or wheel for
slomo.
For T-bar:
The T-BAR has a speed range of 0 Æ 2x with a detent at 1x play
speed
OR a range of 0 Æ 1x (detent at 1x Play speed).
Press {SPD-RNG} softkey to toggle between SLOMO speed
ranges:
0 Æ 1x OR 0 Æ 2x.
Press {BACK} softkey to return to SLOMO MENU.
Press [ESC] to exit OR turn the Wheel to select another item.
For Wheel:
Press the {PRSET} sofkey to toggle between UPDATE and STATIC.
UPDATE: When exiting SLOMO mode, the last used speed is
saved in the Preset Speed register.
STATIC: The Preset Speed register is NOT updated when
exiting SLOMO mode. It is only changed by [SHIFT]
+ [SLOMO] (PRESET SLOMO).
Press {SPD-RNG} softkey to toggle between SLOMO speed
ranges: 0 Æ 1x OR 0 Æ 2x.
GANG
MODE
{PERM} Permanent Gang:
The GANG can be created and undone only with the [GANG] key.
{TEMP} Temporary Gang:
Quickly create a GANG by pressing and holding a VTR key, then pressing
other VTR keys.
Quickly undo the GANG by pressing any VTR key.
Video Reference must be connected for frame accurate playout of ganged
Channels.
CLIP SAVE
(Available in
AMP protocol
only)
Select the appropriate softkey to enable or disable SUB CLIP SAVE to
server.
{DMAT} Save sub clips to DMAT only.
{DMAT and SERVER} Save sub clips to DMAT and SERVER.
REF. VIDEO Select the appropriate softkey to enable or disable the reference video
{ON} If reference video is attached.
{OFF} If reference video is not attached. (this will affect the accuracy of
ganged events)