DNF Controls 3040P-DLO-L - Manual (Page 9)

Model 3040P/DLO Page 5 of 35
DEFINITIONS
‰ Words surrounded by brackets in bold type, [ENTER], are keys on the ST400.
‰ Words surrounded by brackets in bold italic type, {LOAD}, are softkeys on the ST400.
‰ [XXX] + [XXX] means hold the two keys down simultaneously.
3. INSTALLATION
a.
Plug one end of a 9-conductor, RS422 serial cable into the VTR 1, VTR2, VTR3, or
VTR4 connector on the rear of the 3040P.
b.
Plug the other end of the 9-conductor, RS422 serial cable into the remote control
connector on the Video Server.
c.
Connect Video Reference (Black Video) to the REF VIDEO connector on the rear of the
3040P.
d.
Connect the facility LTC signal to the LTC Input BNC connector on the rear of the
3040P.
e.
Plug the power supply into an outlet, 90 VAC to 240 VAC.