DNF Controls 3040P-DLO-L - Manual (Page 27)

Model 3040P/DLO Page 23 of 35
b. STOP VALIDATING A PLAYLIST
To stop the validating process, simply press [SHIFT] + [VALIDATE]. When the
validate ends, the validate window will clear itself.
c. PLAYLIST VALIDATION DETECTS THE FOLLOWING
PROBLEMS WITH AN ELEMENT
9 Clip name: When the name of the clip does not exist in the video server.
9 Clip Long: When the clip on the server is five frames or more longer than the one
registered in the 3040P.
9 Clip Short: When the clip on the server is five frames or more shorter than the one
registered in the 3040P.
9 Clip Empty: When the duration of the clip in the 3040P is zero frames.
9 Clip Overlap: When the duration of a clip is so long that it overlaps the next clip to
play.
When the clip duration is undefined, the 3040P will copy the duration from the server
into the element.
Since a small portion of the display is used to display an error, when there are two or
more errors, only one will be shown. It is recommended that once the clip is in error the
user verify the other aspects (i.e. trigger time, clip name, etc.) of the clip.
When the 3040PL displays “Many Errors,” it means that the clip has a problem with the
clip name and also with one of its times (i.e. trigger time and/or duration).
14. SEARCH BY TRIGGER TIME
a. Press [SEARCH].
b. The window is displayed that prompts you to enter the trigger time to search by.
c. Enter the triger time using a numeric keypad.
d. Press [ENTER] to search for the element with the entered trigger time.
e. The Element with the entered trigger time becomes the Current Element. If the exact
time is not found, the list is positioned to the element with the closest time after the
entered time.