DNF Controls 3040P-DLO-L - Manual (Page 14)

Page 10 of 35 Model 3040P/DLO
k. AUTOMATIC DURATION
1) Turn wheel to select automatic duration.
2) Press {CHANGE} to change current settings.
Follow display prompts.
a) Select
{LIST}.
Clips will play using the list’s “Start Time” and “Duration.”
b)
Select {SERVER}.
Clips will play using the clip length time from the server.
3)
Press {BACK} to return to the Setup Menu screen.
l. CLIP ID KEYWORD
When an element has a clip ID that is in the list of Clip ID keywords, the 3040P will not
attempt to load and play such element.
1)
Turn the wheel to select Clip ID keyword.
2) Press {CHANGE} to view current list of keywords.
3) Press {EXIT} to return to Setup Menu.
OR
Press {MODIFY} to change the keyword list.
a) Following the instructions on the screen, enter up to 10 keywords.
b) Press {EXIT} to return to the Setup Menu screen.
m. ERROR LED ALERT
When ERROR LED ALERT is set to ON, the 6 LED’s above the softkeys will begin to
flash when an error occurs. The operator may clear the flashing LEDs by accessing the
Error screen ([SHIFT/ESC] + [MENU]) and pressing {LED OFF}.