Video server setup, 3040p setup, A. louth port setup – DNF Controls 3040P-DLO-L User Manual
Page 11: B. ntsc/pal/df setup
Model 3040P/DLO
Page 7 of 35
5. VIDEO
SERVER
SETUP
Select “Louth” or “VDCP” control protocol on the video server. Refer to the manufacturer’s
documentation for configuration instructions and other setups required before usage.
6. 3040P
SETUP
Press [MENU]. The current settings of the 3040P are displayed.
Press {EXIT} or [ESC] at any time to exit the Setup Menu.
Turn the wheel to select the setting to change.
a. LOUTH
PORT
SETUP
Set the Louth Port Number on the video server to be controlled
1) Press
[MENU]. The current settings of the 3040P are displayed.
2)
Turn the wheel to select LOUTH PORT.
3) Press
{CHANGE}.
4)
Using the numeric keypad, enter the Louth Port number to be controlled by the
3040P.
5) Press
{OUTPUT} to select a playout channel. The display will return to the
Main Menu Screen and show the entered setting. Press {EXIT}.
6)
Repeat steps 1-4 for each VTR/Port
b. NTSC/PAL/DF
SETUP
Set the Video Standard. This setting affects all time computations.
1)
Turn the wheel to select STANDARD.
2) Press
{CHANGE} to change the current setting. Follow the displayed prompts.
3)
Press the {BACK} key to return to the Setup Menu screen.