DNF Controls 3040P-DLO-L - Manual (Page 28)

Page 24 of 35 Model 3040P/DLO
15. GANG SETUP
a. Press [GANG] key.
b. The Window appears prompting to select Channels to add to / clear from gang.
c. Press [VTR1] thru [VTR4] keys to add the VTR to the gang or clear it from gang.
d. Press [ESC] when done.
When VTRs are ganged, all transport functions apply to all ganged VTRs.
16. VTR CONTROL
Channels 5 and 6 of the 3040P-DLO-L may be used for basic Transport control of Tape Machines.
To control a VTR from Channel 5 (6):
a. Plug 9-pin standard cable into VTR’s “Remote” connector and into VTR 5 (VTR 6)
connector on the back of the 3040.
b. Press VTR [5] (or VTR [6]) key.
c. Use [PLAY], [STOP], [REW], [FWD], [JOG], [SHUTTLE] keys for transport control
of a VTR.
d. Use [RECUE] key to enter time to search to.
e. Use {TC/TM} softkey to toggle between TC and TM time modes.