DNF Controls 3040P-DLO-L - Manual (Page 21)

Model 3040P/DLO Page 17 of 35
c. SINGLE ELEMENT PLAYOUT/RECORD
1) PLAYING A SINGLE ELEMENT
Single Element Playout plays out only one element at a time. When the end of
the element is reached, play out stops and the next element in the list is cued.
a)
Confirm that Reference Video is connected to the REF VID IN
connector on the rear of the 3040P/DLO. The REF indicator, on the
display, to the right of the LTC Input time, will be on and NOT
flashing. If the REF indicator is flashing, reference video is missing.
Single Element Playout will not operate.
b)
Select channel by pressing VTR key “1”, “2”, “3”, or “4”.
c)
In the Setup Menu, set Delete Mode= ON or OFF. If Delete Mode=
ON, enter the number of elements to keep after playout. Refer to
Section 6f for more information.
d)
If the channel’s playlist is empty, download a playlist into this channel
(Section 10) or manually enter a playlist using the EDIT functions
(Section 12).
e)
Use the [NEXT], [LAST], [SHIFT] + [NEXT], [SHIFT] + [LAST],
[ALT] + [NEXT], and [ALT] + [LAST] keys to select the playlist
element to play.
f) Press
[SINGLE] to enable this playout mode. The SINGLE LED will
turn on.
g) Press
[PLAY] to begin playout.
At anytime, press [STOP] to terminate playout.
At anytime, press [SHIFT] + [SINGLE] to disable Single Playout
Mode. The SINGLE LED will turn off.
2) RECORDING A SINGLE ELEMENT
a) Select an Input Louth Port in the setup menu.
b) Follow steps a-f in the previous section to enable Single Playout Mode.
Element’s trigger type has to be record type.
c) Press [REC] to start recording the highlighted element.