DNF Controls 3040P-DLO-L - Manual (Page 17)

Model 3040P/DLO Page 13 of 35
8. 3040P MAIN SCREEN LAYOUT
The 3040P main screen is made up of 7 individual windows. Refer to Figure 1, 3040P Download
Main Screen Layout (Section 7).
a. CLIP REMAINING TIME
This window is located in the upper left-hand corner of the display. During Automatic,
Semi-Automatic, and Single Element Playout Modes, this display shows the Remaining
Playout Time of the clip. It counts down from the clip duration time to 00:00:00:00,
when playout completes.
When Automatic, Semi-Automatic, and Single Element Playout Modes are disabled, this
window will show the Elapsed Time of the clip in play, wind, jog, and shuttle modes.
b. SYNC PRESENCE INDICATOR
This window is located just to the right of the CLIP REMAINING TIME window. It will
display a non-flashing “REF” when video reference is connected to REF VIDEO IN
connector on the rear of the 3040P. It will display a flashing “REF” when video
reference is not detected.
Video reference is required for Semi-Automatic Playout Mode.
c. LTC INPUT TIME
This window is located in the upper right hand corner of the display. It displays the LTC
INPUT time, the reference time used during Automatic Playout Mode. If the LTC
INPUT signal is disconnected for more than 1 second, the display will show “NO TC
INPUT.”
LTC is required for Automatic-Playout Mode.
d. CURRENT ELEMENT WINDOW
This window is located in the upper left hand corner, just below the CLIP REMAINING
TIME window. This window displays the Playlist number (PL) for the currently selected
channel. PL01 is assigned to VTR1. PL02 is assigned to VTR2. PL03 is assigned to
VTR3. PL04 is assigned to VTR4.
This window also displays the total number of elements in the playlist, as well as the
number of the element that is currently playing or last played out. The Clip ID, Start
Time, and Duration for this element are also shown.
e. DOWNLOAD MESSAGE WINDOW
This window is located in the upper right-hand corner, just below the LTC INPUT TIME
window. All download status messages are displayed here. When a download is in
process, the display will show the total number of elements to download as well as the
number of elements downloaded.