DNF Controls 3040P-DLO-L - Manual (Page 12)

Page 8 of 35 Model 3040P/DLO
c. WIND SPEED & MODE
Set the speed and mode of the FFWD and Rewind key. If Hold mode is selected, the
video will move only while the FFWD or RWD key is held down. In Latch mode, the
video will move until [STOP] is pressed.
1)
Turn the wheel to select STANDARD.
2)
Press {CHANGE} to change the current setting. Follow the displayed prompts.
3) Press {BACK} to return to the Setup Menu screen.
d. EXTENDED CLIP IDS
Set the clip ID size supported by the video server. Set Extended Clips = ON if clips IDs
are greater than 8 characters in length. Set Extended Clips = OFF if All clip IDs are no
more than 8 characters in length.
1)
Turn the wheel to select EXTENDED IDs.
2) Press {CHANGE} to change the current setting. Follow the displayed prompts.
3) Press
{BACK} to return to the Setup Menu screen.
e. DSK – PREROLL UPDATE
1)
OFF – Will not send update command to server.
2) ON – Will send update command to server.
f. PLAY PREROLL
Set the play command latency for the current channel. The default value is 5 frames. For
Sony MAV-70 use 72 frames. For Profile-XP use 40 frames.
1)
Turn the wheel to select PLAY PREROLL.
2) Press {CHANGE} to change the current setting. Follow the displayed prompts.
3) Press
{BACK} to return to the Setup Menu screen.
g. RECORD PREROLL
1) Turn the wheel to select RECORD PREROLL.
2) Press {CHANGE} to change the current setting. Follow the displayed prompts.
3) Press {BACK} to return to the Setup Menu Screen.