DNF Controls 3040P-DLO-L - Manual (Page 19)

Model 3040P/DLO Page 15 of 35
9.
PLAYOUT A PLAYLIST
a. AUTOMATIC PLAYOUT/RECORD
1) PLAYING
A LIST
Under Automatic Playout, the list plays out using element time triggers and the
LTC Input time signal.
Hard Trigger elements will begin playout when the LTC Input time matches the
element’s trigger time. Follow-Along elements will begin playout when the
preceding element completes playout. Manual elements will wait for a manual
PLAY key press to begin playout. Refer to Section 6i, AUTOMATIC MODE
MANNED/UNMANNED, for a description of how Follow-Along and Manual
elements are handled.
a) Confirm that LTC time is visible in the upper right hand corner of the
display. If “No LTC Input” is displayed Automatic Playout will not
operate. Check your LTC cable connections.
b)
Select channel by pressing VTR key “1”, “2”, “3”, or “4”.
c)
In the Setup Menu, set Automatic Mode= Manned or Unmanned.
Refer to Section 6g for more information.
d)
In the Setup Menu, set Delete Mode= ON or OFF. If Delete Mode=
ON, enter the number of elements to keep after playout. Refer to
Section 6h for more information.
e)
If the channel’s playlist is empty, download a playlist into this channel
(Section 10) or manually enter a playlist using the EDIT functions
(Section 12).
e) Press
[AUTO] to enable Automatic Playout Mode. The AUTO led will
turn on.
The first element in the list with a trigger time just after the current
LTC Input time will be the “Next Element.” On the display, open
arrows will be placed on both sides of this element.
Playout of the list will continue until all elements are played out or
playout is stopped.
At anytime, press the [SHIFT] + [AUTO] key to stop and disable
Automatic Playout. The AUTO LED will turn off.