DNF Controls 3040P-DLO-L - Manual (Page 25)

Model 3040P/DLO Page 21 of 35
c. ADD A NEW ELEMENT TO THE LIST
1)
Press {NEW} softkey.
2)
The display will prompt you to enter data for a new element.
3) The new element trigger type defaults to Follow Along if output port, or Follow
Along Record if input port.
4) The 3040P/DLO will automatically calculate the trigger time of the element,
based on the last element’s trigger time and duration.
5) Once the clip name has been entered, the 3040 will get the clip duration from the
server. If there is no communication between 3040P/DLO and server OR if the
clip does not exist, then the duration will default to 30 secs.
6) The following softkeys are also displayed:
{
Å
} Select previous element field to edit
When this softkey is pressed the highlight
moves to the previous element field.
{
Å
} Select the next element field to edit.
When this softkey is pressed the highlight
moves to the next element field.
{C-LIST} View the list of clips available on the server.
When this softkey is pressed a list of clips is
displayed. Use the wheel to scroll through
the list of clips, press [ENTER] to save a
clip name as part of the element, or [ESC] to
return to editing the element.
{INSERT} Insert the edited element relative to the trigger time in
the list.
{APPEND} Append the edited element to the end of the list.
NOTE: For all Hard Triggered and Follow-Along type elements the list is
automatically sorted by Triggr Time.
{TOGGLE}
Lets you change the element’s trigger type.
7) Using the numeric keyboard on the 3040P or PC keyboard, edit all parts of an
element, then press one of the softkeys to Replace the element in the list, Insert
or Append the element.
Press [ESC] at any time to exit Edit.