Daktronics DakStats 3000 Rodeo - Manual (Page 7)

Installation & Registration 3
Section 2: Installation & Registration
2.1 Installation
Downloading from the Internet
1. Open an Internet browser to: http://dakfiles.daktronics.com/downloads/DakStats
2. Click on the “DakStats 3000 Rodeo Installation.exe” file, and then click Run (twice if
necessary) to begin the installation procedure.
3. Follow the onscreen instructions to complete the installation.
Installing from the Installation CD
1. Insert the installation CD.
2. Navigate to the “Rodeo” folder.
3. Double-click on the “DakStats 3000 Rodeo Installation” file.
4. Follow the onscreen instructions.
5. Click Finish when done.
2.2 Opening & Exiting the Application
To open the application:
 Double-click the “DakStats 3000 Rodeo” icon on the desktop
(Figure 1).
 Click the Start menu and navigate to All Programs >
Daktronics > DakStats 3000 Rodeo.
To exit the application:
 Click the exit button in the upper-right corner of the window.
 Left- or right-click the icon in the upper-left corner of the window and click Close.
 Go to File > Exit.
2.3 Registration
After installing the DakStats 3000 Rodeo software,
users are given a free 30 day trial period. Each time
the program is opened, the number of days remaining
for the free trial is shown. To use the software without
registering, click Continue. When the 30 day trial
period is over, users must register the software as
described below:
1. Send an email to [email protected]
containing the Serial Number shown on the top
right side of the registration screen (Figure 2).
2. Upon proof of purchase, Daktronics will
email an unlock code.
3. Type in or Paste the registration code in the
Enter Eight Digit Unlock Code text box on the registration screen.
4. Click Unlock followed by Continue to begin using the software.
Figure 1: DakStats
Rodeo Icon
Figure 2: Registration Screen