Comtech EF Data PCB-4300 - Manual (Page 48)

PCB-4300 1:2 Phase Combiner Revision 2
Flash Upgrading MN/PCB4300.IOM
4–6
Step Procedure
11
Upon successful completion of
the upload, the user may click on
‘Go Back to Start’ (if, for
example, more than one
PCB-4300 1:2 Phase Combined
System requires upgrade) or
‘Close’ (to exit the FLSHCAT
program).
12
If needed, disconnect the
CA/WR12243-1 System
Programming Cable and
reconnect the original System
Communications connection
cable.
13
The LEDs on the top of the
PCCB may illuminate GREEN
(unmuted), ORANGE (muted), or
RED (faulted) to indicate the
current status of the PCCB,
SSPA1, SSPA2, and SSPA3
operations.
Refer to Chapter 3.
OPERATION AND
ADJUSTMENT PROCEDURES
for more information on these
operational states of the
PCB-4300.
The upgrade process has been successfully completed.