Comtech EF Data UT-4579 - Manual (Page 83)

UT4579 X-Band Up Converter MN/UT4579.IOM
Remote Control Rev. 0
67
B.7 E RROR P ROCESSING
B.7.1 G ENERAL E RRORS
The following Error Responses may be generated by any command instead of a
confirmation:
>DEV?COM CU CMD UNRECOGNIZED'cr''lf']
>DEV?COM IP INVALID PARAM'cr''lf']
>DEV?COM PE PARITY ERROR'cr''lf']
B.7.2 C ONFIGURATION E RRORS
The following Error Responses may be generated by configuration commands:
>DEV?COM LO DEVICE IN LOCAL MODE'cr''lf']
B.7.3 M ODE E RRORS
The following Error Responses may be generated by Mode selection:
>DEV?COM AE ONLY VALID WHEN BACKUP'cr''lf']
>DEV?COM OE OFFLINE NOT AVAILABLE'cr''lf']
>DEV?COM CN COMMAND NOT AVAILABLE'cr''lf']
B.7.4 T
IME
-O
UTS
A time-out should be assumed if there is no response in 500 milliseconds. The station
monitor and control computer should try at least three times.