Comtech EF Data SDR-54A - Manual (Page 84)

SDR-54A Satellite Demodulator Revision 4
Remote Control Specification MN/SDR54A.IOM
Bit Error Rate
Threshold Command:
Response:
Status:
Response: <1/BERT_xxxx'cr'
>1/BERT_xxxx'cr''lf']
<1/BERT_'cr'
>1/BERT_xxxx'cr''lf']
Where: xxxx = NONE or E1 -n (where n = 3, 4, 5, 6, 7, or 8
[exponent of threshold]).
Sets the exponent for the fault reporting for of BER threshold.
Entering NONE turns off BER testing.
Reed-
Solomon
Decoder
Enable Command:
Response:
Status:
Response:
<1/RSDE_xxx'cr'
>1/RSDE_xxx'cr''lf']
<1/RSDE_'cr'
>1/RSDE_xxx'cr''lf'] Where: xxx = ON or OFF.
RX Reed-
Solomon I
Value Command:
Response:
Status:
Response:
<1/RRSI_xx'cr'
>1/RRSI_xx'cr''lf']
<1/RRSI_'cr'
>1/RRSI_xx'cr''lf']
Where: xx = 8 or 16.
A–6