Comtech EF Data MIDAS Version 4.X NMS Configuration - Manual (Page 94)

MIDAS 4.X NMS Configuration, Rev.6
2–66 Setup and Operation
Point-to-Multipoint
Data Details
This is the list of channels assigned to the current group. The channel shown at
the top of the list is the current broadcaster channel, which is indicated by the
Broadcaster and the members information on the bottom are the destination
call’s properties.
All the information displayed above comes from the settings entered when
setting up a new Point-to-Multipoint call.
The window will display Broadcaster’s Enable Status (Enabled/Disabled) and
call status (Active/Inactive).