Comtech EF Data MIDAS Version 4.X NMS Configuration - Manual (Page 66)

MIDAS 4.X NMS Configuration, Rev.6
2–38 Setup and Operation
The Site window provides fields for Site information and parameters, displays the list of
Nodes, and allows the operator to Edit, Add, Enable, Disable, and Delete Nodes.
Add Add a new Site by entering the following:
Name
Description
Site Type
NMS Site
(Node Channel Status) Display only window. Site will display the following:
Site Status
Color Text Description
Green Online-CIP Site has all associated nodes online, at least one node online-CIP
Dark Blue Online Site has all associated nodes online, but none with CIP
Red Fault Site has all nodes faulted
Yellow Warning Site has some, but not all, nodes faulted, or site has nodes reporting a warning status
Transparent Disabled All nodes at site are disabled (Network Administration)
Light Blue Disabled All nodes at site are disabled (HPOV Map)
Settings: These parameters only apply if Power Management option is purchased and
enabled. It is critical to enter correct values to ensure that a site does not
saturate the RF equipment at the site.
TX Gain
Enter dB gain from Modem to HPA. (Modem to HPA)
HPA Power Rated - Enter Manufactures Rated HPA Power in Watts.
Backoff – Enter Manufactures Rated Backoff in dB.
Control Change Enter TX Power of SNM-1000/1010. (Burst TX Power)
EDIT Edit a current site.
Apply Apply additions/changes.
Cancel Cancel additions/changes.
Delete Delete site.
Note: All site Nodes and Channels must be Inactive/Disabled first.
Enable Enable site.
Disable Disable site.
Export
Display text summary of site.
Refresh Refresh page.