Comtech EF Data MIDAS Version 4.X NMS Configuration - Manual (Page 144)

MIDAS 4.X NMS Configuration, Rev. 6
A-12 Frequency Translations
Figure A- 8. MIDAS C-Band Transponder Setup Example
Note: Refer to Section 2, Initial Setup Procedures for descriptions of additional System
Setup parameters.
After System Setup parameters are set, clicking OK will cause the Controller to reboot
with the new parameters. Allow the Controller to reboot. The Controller will be in an
exception state because the Space Segment and Control Channel has yet to be defined.
Connect to the Controller with the NMS and select Bandwidth Administrator to set up
the Space Segment.