Comtech EF Data KST-12025 - Manual (Page 23)

KST-12025 Ku-Band Satellite Terminal Introduction
Rev. 1 1–7
1.3 Specifications
Table 1-1. KST-12025 System Specifications
RF Input Connector Type N female
RF Output Connector WR-75G
TX Band 14.0 to 14.5 GHz
RX Band 10.95 to 12.75 GHz
10.95 to 11.7 GHz
11.7 to 12.2 GHz
12.25 to 12.75 GHz
IF Interface Two 70 MHz ports
IF Out Connector Type TNC female
IF In Connector Type TNC female
IF Out Impedance 50
Ω
IF Out RTN Loss > 19 dB at 70 MHz ± 18 MHz
IF In Impedance 50
Ω
IF In RTN Loss > 19 dB at 70 MHz ± 18 MHz
Prime Power Options 90 to 230 VAC, 47 to 63 Hz, using a 6’ cable North American
3-prong plug, or 48 VDC (40 to 60V)
Power Consumption:
25W RF Output 800W AC or DC Input
Physical:
Size (RFT-1225)
Weight 26.5” H x 12.7” W x 9.3” D (refer to Figure 1-6)
49 lbs. maximum
Environmental:
Temperature
Thermal Gradient
Humidity
Precipitation
Salt Fog
Sand and Dust
Altitude
Solar Radiation
Safety
Emissions
ES Discharge
-40° to +55°C operating
-50° to +75°C survival
40°C/hour
10°C/15 min.
0% to 100% relative at -40° to +55°C
95% at 65°C/72 hr.
810/Method 506.2
810/Method 509.2
810/Method 510.1
0 to 15,000 ft oper, 0 to 50,000 ft. surv.
360 BTU/hr./ft2 at 50°C
Capable of UL, CSA, VDE, IEC
FCC Part 15, J, Class A
10 kV operation, 15 kV survival