A.3 configuration commands/responses – Comtech EF Data KST-12025 User Manual
Page 114
Remote Control Operation
KST-12025 Ku-Band Satellite Terminal
A–4
Rev. 1
A.3 Configuration
Commands/Responses
Up Converter
Freq Select
Command:
Response:
Status:
Response:
RF_OFF'cr''lf']
Where:
In version -1, nnnnn.n = 14000.0 to 14500.0 MHz, in 2.5 MHz
steps.
In version -2, nnnnn.n = 14000.0 to 14500.0 MHz, in 1.0 MHz
steps.
Down
Converter
Freq Select
Command:
Response:
Status:
Response:
Where:.
In version -1, nnnnn.n = 10950.0 to 12750.0 MHz, in 2.5 MHz
steps.
In version -2, nnnnn.n = 10950.0 to 12750.0 MHz, in 1.0 MHz
steps.
RF Output
Command:
Response:
Status:
Response:
Where: xxx = ON, WRM, or OFF.
The OFF command will keep the RF output turned OFF under all
conditions.
The WRM command is a conditional ON command, instructing the
RF output to come ON after the unit is warmed up and meets
stability requirements.
The ON command is an override, instructing the output to be ON and
to ignore the warm start.
Up Converter
Attenuator
Command:
Response:
Status:
Response:
Where: nn.n = 0.0 to 25.0 dB, in 0.5 dB steps.
Down
Converter
Attenuator
Command:
Response:
Status:
Response:
Where: nn.n = 0.0 to 20.0 dB, in 0.5 dB steps.