Comtech EF Data CST-5005 - Manual (Page 69)

Rev. 1 4–1
4
Chapter 4 .
OPERATION
This chapter provides operation information for the RFT-505.
4.1 System Operation
There are two methods of operating the RFT-505:
•
Connect a PC running DOS to the RS-232-C/485 remote control port, and run
the M&C system monitor software. This software is DOS-based and provides an
interface to the remote commands.
For more information on the M&C system monitor program, refer to the Monitor
and Control Software for EFData Satellite Terminals User’s Guide.
•
Connect the optional KP-10 hand-held keypad. For more information, refer to
the KP-10 External Keypad Installation and Operation Manual.
4.2 Remote Control
Refer to Appendix A.