Comtech EF Data CST-5005 - Manual (Page 55)

CST-5005 C-Band Satellite Terminal Redundant System Installation
Rev. 1 3–7
3.3 RFT Installation
At the customer’s discretion, the RFTs can be installed anywhere on or near the antenna.
The supplied hardware allows the installer a wide range of installation alternatives,
including:
•
Vertical pole (e.g., mast) (either square or round). This is the most typical
installation.
•
Within the hub of a large antenna.
•
Spar (i.e., rectangular bar) on the antenna structure.
EFData recommends that the RFTs be mounted vertically, with the air inlets facing the
ground.