Comtech EF Data CST-5005 - Manual (Page 107)

Filename: T_ERRATA 1
Errata A
Comtech EFData Documentation Update
Subject: Changes to Table 1-2 (Gain Adjust Range)
Date: October 24, 1997
Document: CST-5005 C-Band Satellite Terminal Installation and Operation
Manual, Rev. 1, dated July 23, 1996
Part Number: MN/CST5005.EA1
Collating Instructions: Attach this page to page 1-1
Comments:
The following changes provide updated information for Table 1-2. This information will be
incorporated into the next revision.
Change Specifics:
Table 1-2. RFT-505 Specifications
Transmit
Output Frequency (No inversion) 5.845 to 6.425 GHz
Input Frequency 70 MHz, ± 18 MHz (optional 140 MHz, ± 36 MHz)
Output Power:
at 1 dB compression +8 dBm
or 5W (+37 dBm)
or 10W (+40 dBm)
Third Order Intercept +18 dBm (for +8 dBm)
or +46 dBm (for 5W)
or +49 dBm (for 10W)
Nominal Small Signal Gain 26 dB (for +8 dBm)
or 68 dB (for 5W)
or +71 dBm (for 10W)
Gain Adjust Range (from nominal) 0 to 25 dB, in 0.5 dB steps
Gain Variation:
Over 36 MHz
Over 36 MHz, temperature, and aging ± 1 dB max
4 dB max variation
Noise Figure:
Maximum attenuation
Minimum attenuation 23 dB max
15 dB max
Group Delay, Total Variation in Passband 10 ns max
Synthesizer Step Size 125 kHz